Struct engine_panic::PanicExternalSstFileReader [−][src]
pub struct PanicExternalSstFileReader;
Trait Implementations
impl Read for PanicExternalSstFileReader[src][+]
fn read(&mut self, buf: &mut [u8]) -> Result<usize>[src][−]
Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more
pub fn read_vectored(
&mut self,
bufs: &mut [IoSliceMut<'_>]
) -> Result<usize, Error>1.36.0[src][−]
&mut self,
bufs: &mut [IoSliceMut<'_>]
) -> Result<usize, Error>
Like read, except that it reads into a slice of buffers. Read more
pub fn is_read_vectored(&self) -> bool[src][−]
can_vector)Determines if this Reader has an efficient read_vectored
implementation. Read more
pub unsafe fn initializer(&self) -> Initializer[src][−]
read_initializer)Determines if this Reader can work with buffers of uninitialized
memory. Read more
pub fn read_to_end(&mut self, buf: &mut Vec<u8, Global>) -> Result<usize, Error>1.0.0[src][−]
Read all bytes until EOF in this source, placing them into buf. Read more
pub fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>1.0.0[src][−]
Read all bytes until EOF in this source, appending them to buf. Read more
pub fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>1.6.0[src][−]
Read the exact number of bytes required to fill buf. Read more
pub fn by_ref(&mut self) -> &mut Self1.0.0[src][−]
Creates a “by reference” adaptor for this instance of Read. Read more
pub fn bytes(self) -> Bytes<Self>1.0.0[src][−]
pub fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read, 1.0.0[src][−]
R: Read,
Creates an adaptor which will chain this stream with another. Read more
pub fn take(self, limit: u64) -> Take<Self>1.0.0[src][−]
Creates an adaptor which will read at most limit bytes from it. Read more
Auto Trait Implementations
impl RefUnwindSafe for PanicExternalSstFileReader
impl Send for PanicExternalSstFileReader
impl Sync for PanicExternalSstFileReader
impl Unpin for PanicExternalSstFileReader
impl UnwindSafe for PanicExternalSstFileReader
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized, [src][+]
T: 'static + ?Sized,
pub fn type_id(&self) -> TypeId[src][−]
Gets the TypeId of self. Read more
impl<T> Borrow<T> for T where
T: ?Sized, [src][+]
T: ?Sized,
pub fn borrow(&self) -> &T[src][−]
Immutably borrows from an owned value. Read more
impl<T> BorrowMut<T> for T where
T: ?Sized, [src][+]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T[src][−]
Mutably borrows from an owned value. Read more
impl<T> From<T> for T[src][+]
impl<T> Instrument for T[src][+]
pub fn instrument(self, span: Span) -> Instrumented<Self>[src][−]
Instruments this type with the provided Span, returning an
Instrumented wrapper. Read more
pub fn in_current_span(self) -> Instrumented<Self>[src][−]
impl<T, U> Into<U> for T where
U: From<T>, [src][+]
U: From<T>,
impl<T> Pointable for T[src][+]
pub const ALIGN: usize[src][−][−]
The alignment of pointer.
type Init = T
The type for initializers.
pub unsafe fn init(init: <T as Pointable>::Init) -> usize[src][−]
Initializes a with the given initializer. Read more
pub unsafe fn deref<'a>(ptr: usize) -> &'a T[src][−]
Dereferences the given pointer. Read more
pub unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T[src][−]
Mutably dereferences the given pointer. Read more
pub unsafe fn drop(ptr: usize)[src][−]
Drops the object pointed to by the given pointer. Read more
impl<R> ReadBytesExt for R where
R: Read + ?Sized, [src][+]
R: Read + ?Sized,
pub fn read_u8(&mut self) -> Result<u8, Error>[src][−]
Reads an unsigned 8 bit integer from the underlying reader. Read more
pub fn read_i8(&mut self) -> Result<i8, Error>[src][−]
Reads a signed 8 bit integer from the underlying reader. Read more
pub fn read_u16<T>(&mut self) -> Result<u16, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads an unsigned 16 bit integer from the underlying reader. Read more
pub fn read_i16<T>(&mut self) -> Result<i16, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a signed 16 bit integer from the underlying reader. Read more
pub fn read_u24<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads an unsigned 24 bit integer from the underlying reader. Read more
pub fn read_i24<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a signed 24 bit integer from the underlying reader. Read more
pub fn read_u32<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads an unsigned 32 bit integer from the underlying reader. Read more
pub fn read_i32<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a signed 32 bit integer from the underlying reader. Read more
pub fn read_u48<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads an unsigned 48 bit integer from the underlying reader. Read more
pub fn read_i48<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a signed 48 bit integer from the underlying reader. Read more
pub fn read_u64<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads an unsigned 64 bit integer from the underlying reader. Read more
pub fn read_i64<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a signed 64 bit integer from the underlying reader. Read more
pub fn read_u128<T>(&mut self) -> Result<u128, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads an unsigned 128 bit integer from the underlying reader. Read more
pub fn read_i128<T>(&mut self) -> Result<i128, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a signed 128 bit integer from the underlying reader. Read more
pub fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads an unsigned n-bytes integer from the underlying reader. Read more
pub fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a signed n-bytes integer from the underlying reader. Read more
pub fn read_uint128<T>(&mut self, nbytes: usize) -> Result<u128, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads an unsigned n-bytes integer from the underlying reader.
pub fn read_int128<T>(&mut self, nbytes: usize) -> Result<i128, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a signed n-bytes integer from the underlying reader.
pub fn read_f32<T>(&mut self) -> Result<f32, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader. Read more
pub fn read_f64<T>(&mut self) -> Result<f64, Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader. Read more
pub fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a sequence of unsigned 16 bit integers from the underlying reader. Read more
pub fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a sequence of unsigned 32 bit integers from the underlying reader. Read more
pub fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a sequence of unsigned 64 bit integers from the underlying reader. Read more
pub fn read_u128_into<T>(&mut self, dst: &mut [u128]) -> Result<(), Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a sequence of unsigned 128 bit integers from the underlying reader. Read more
pub fn read_i8_into(&mut self, dst: &mut [i8]) -> Result<(), Error>[src][−]
Reads a sequence of signed 8 bit integers from the underlying reader. Read more
pub fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a sequence of signed 16 bit integers from the underlying reader. Read more
pub fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a sequence of signed 32 bit integers from the underlying reader. Read more
pub fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a sequence of signed 64 bit integers from the underlying reader. Read more
pub fn read_i128_into<T>(&mut self, dst: &mut [i128]) -> Result<(), Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a sequence of signed 128 bit integers from the underlying reader. Read more
pub fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader. Read more
pub fn read_f32_into_unchecked<T>(
&mut self,
dst: &mut [f32]
) -> Result<(), Error> where
T: ByteOrder, [src][−]
&mut self,
dst: &mut [f32]
) -> Result<(), Error> where
T: ByteOrder,
please use read_f32_into instead
DEPRECATED. Read more
pub fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder, [src][−]
T: ByteOrder,
Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader. Read more
pub fn read_f64_into_unchecked<T>(
&mut self,
dst: &mut [f64]
) -> Result<(), Error> where
T: ByteOrder, [src][−]
&mut self,
dst: &mut [f64]
) -> Result<(), Error> where
T: ByteOrder,
please use read_f64_into instead
DEPRECATED. Read more
impl<T> Same<T> for T[src]
type Output = T
Should always be Self
impl<T> Sealed<T> for T where
T: ?Sized, [src]
T: ?Sized,
impl<T> SendSyncUnwindSafe for T where
T: Send + Sync + UnwindSafe + ?Sized, [src]
T: Send + Sync + UnwindSafe + ?Sized,
impl<T, U> TryFrom<U> for T where
U: Into<T>, [src][+]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src][−]
Performs the conversion.
impl<T, U> TryInto<U> for T where
U: TryFrom<T>, [src][+]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src][−]
Performs the conversion.
impl<V, T> VZip<V> for T where
V: MultiLane<T>, [src][+]
V: MultiLane<T>,