#![no_std]
extern crate libc;

use libc::{c_void, c_char, c_uint, size_t, c_int};

#[derive(Clone, Copy)]
#[repr(C)]
pub struct LZ4FCompressionContext(pub *mut c_void);
unsafe impl Send for LZ4FCompressionContext {}

#[derive(Clone, Copy)]
#[repr(C)]
pub struct LZ4FDecompressionContext(pub *mut c_void);
unsafe impl Send for LZ4FDecompressionContext {}

pub type LZ4FErrorCode = size_t;

#[derive(Clone)]
#[repr(u32)]
pub enum BlockSize {
    Default = 0, // Default - 64KB
    Max64KB = 4,
    Max256KB = 5,
    Max1MB = 6,
    Max4MB = 7,
}

impl BlockSize {
    pub fn get_size(&self) -> usize {
        match self {
            &BlockSize::Default |
            &BlockSize::Max64KB => 64 * 1024,
            &BlockSize::Max256KB => 256 * 1024,
            &BlockSize::Max1MB => 1 * 1024 * 1024,
            &BlockSize::Max4MB => 4 * 1024 * 1024,
        }
    }
}

#[derive(Clone)]
#[repr(u32)]
pub enum BlockMode {
    Linked = 0,
    Independent,
}

#[derive(Clone)]
#[repr(u32)]
pub enum ContentChecksum {
    NoChecksum = 0,
    ChecksumEnabled,
}

#[repr(C)]
pub struct LZ4FFrameInfo {
    pub block_size_id: BlockSize,
    pub block_mode: BlockMode,
    pub content_checksum_flag: ContentChecksum,
    pub reserved: [c_uint; 5],
}

#[repr(C)]
pub struct LZ4FPreferences {
    pub frame_info: LZ4FFrameInfo,
    pub compression_level: c_uint, // 0 == default (fast mode); values above 16 count as 16
    pub auto_flush: c_uint, // 1 == always flush : reduce need for tmp buffer
    pub reserved: [c_uint; 4],
}

#[repr(C)]
pub struct LZ4FCompressOptions {
    pub stable_src: c_uint, /* 1 == src content will remain available on future calls
                             * to LZ4F_compress(); avoid saving src content within tmp
                             * buffer as future dictionary */
    pub reserved: [c_uint; 3],
}

#[repr(C)]
pub struct LZ4FDecompressOptions {
    pub stable_dst: c_uint, /* guarantee that decompressed data will still be there on next
                             * function calls (avoid storage into tmp buffers) */
    pub reserved: [c_uint; 3],
}

#[repr(C)]
pub struct LZ4StreamEncode(c_void);

#[repr(C)]
pub struct LZ4StreamDecode(c_void);

pub const LZ4F_VERSION: c_uint = 100;

extern "C" {

    // int LZ4_compress_default(const char* source, char* dest, int sourceSize, int maxDestSize);
    #[allow(non_snake_case)]
    pub fn LZ4_compress_default (source: *const c_char, dest: *mut c_char, sourceSize: c_int, maxDestSize: c_int) -> c_int;

    // int LZ4_compress_fast (const char* source, char* dest, int sourceSize, int maxDestSize, int acceleration);
    #[allow(non_snake_case)]
    pub fn LZ4_compress_fast (source: *const c_char, dest: *mut c_char, sourceSize: c_int, maxDestSize: c_int, acceleration: c_int) -> c_int;

    // int LZ4_compress_HC (const char* src, char* dst, int srcSize, int dstCapacity, int compressionLevel);
    #[allow(non_snake_case)]
    pub fn LZ4_compress_HC (src: *const c_char, dst: *mut c_char, srcSize: c_int, dstCapacity: c_int, compressionLevel: c_int) -> c_int;

    // int LZ4_decompress_safe (const char* source, char* dest, int compressedSize, int maxDecompressedSize);
    #[allow(non_snake_case)]
    pub fn LZ4_decompress_safe (source: *const c_char, dest: *mut c_char, compressedSize: c_int, maxDecompressedSize: c_int) -> c_int;

    // unsigned    LZ4F_isError(LZ4F_errorCode_t code);
    pub fn LZ4F_isError(code: size_t) -> c_uint;

    // const char* LZ4F_getErrorName(LZ4F_errorCode_t code);
    pub fn LZ4F_getErrorName(code: size_t) -> *const c_char;

    // LZ4F_createCompressionContext() :
    // The first thing to do is to create a compressionContext object, which will be used in all
    // compression operations.
    // This is achieved using LZ4F_createCompressionContext(), which takes as argument a version
    // and an LZ4F_preferences_t structure.
    // The version provided MUST be LZ4F_VERSION. It is intended to track potential version
    // differences between different binaries.
    // The function will provide a pointer to a fully allocated LZ4F_compressionContext_t object.
    // If the result LZ4F_errorCode_t is not zero, there was an error during context creation.
    // Object can release its memory using LZ4F_freeCompressionContext();
    //
    // LZ4F_errorCode_t LZ4F_createCompressionContext(
    //                                   LZ4F_compressionContext_t* LZ4F_compressionContextPtr,
    //                                   unsigned version);
    pub fn LZ4F_createCompressionContext(ctx: &mut LZ4FCompressionContext,
                                         version: c_uint)
                                         -> LZ4FErrorCode;

    // LZ4F_errorCode_t LZ4F_freeCompressionContext(
    //                                  LZ4F_compressionContext_t LZ4F_compressionContext);
    pub fn LZ4F_freeCompressionContext(ctx: LZ4FCompressionContext) -> LZ4FErrorCode;

    // LZ4F_compressBegin() :
    // will write the frame header into dstBuffer.
    // dstBuffer must be large enough to accommodate a header (dstMaxSize). Maximum header
    // size is 19 bytes.
    // The LZ4F_preferences_t structure is optional : you can provide NULL as argument, all
    // preferences will then be set to default.
    // The result of the function is the number of bytes written into dstBuffer for the header
    // or an error code (can be tested using LZ4F_isError())
    //
    // size_t LZ4F_compressBegin(LZ4F_compressionContext_t compressionContext,
    //                           void* dstBuffer,
    //                           size_t dstMaxSize,
    //                           const LZ4F_preferences_t* preferencesPtr);
    pub fn LZ4F_compressBegin(ctx: LZ4FCompressionContext,
                              dstBuffer: *mut u8,
                              dstMaxSize: size_t,
                              preferencesPtr: *const LZ4FPreferences)
                              -> LZ4FErrorCode;

    // LZ4F_compressBound() :
    // Provides the minimum size of Dst buffer given srcSize to handle worst case situations.
    // preferencesPtr is optional : you can provide NULL as argument, all preferences will then
    // be set to default.
    // Note that different preferences will produce in different results.
    //
    // size_t LZ4F_compressBound(size_t srcSize, const LZ4F_preferences_t* preferencesPtr);
    pub fn LZ4F_compressBound(srcSize: size_t,
                              preferencesPtr: *const LZ4FPreferences)
                              -> LZ4FErrorCode;

    // LZ4F_compressUpdate()
    // LZ4F_compressUpdate() can be called repetitively to compress as much data as necessary.
    // The most important rule is that dstBuffer MUST be large enough (dstMaxSize) to ensure
    // compression completion even in worst case.
    // If this condition is not respected, LZ4F_compress() will fail (result is an errorCode)
    // You can get the minimum value of dstMaxSize by using LZ4F_compressBound()
    // The LZ4F_compressOptions_t structure is optional : you can provide NULL as argument.
    // The result of the function is the number of bytes written into dstBuffer : it can be zero,
    // meaning input data was just buffered.
    // The function outputs an error code if it fails (can be tested using LZ4F_isError())
    //
    // size_t LZ4F_compressUpdate(LZ4F_compressionContext_t compressionContext,
    //                            void* dstBuffer,
    //                            size_t dstMaxSize,
    //                            const void* srcBuffer,
    //                            size_t srcSize,
    //                            const LZ4F_compressOptions_t* compressOptionsPtr);
    pub fn LZ4F_compressUpdate(ctx: LZ4FCompressionContext,
                               dstBuffer: *mut u8,
                               dstMaxSize: size_t,
                               srcBuffer: *const u8,
                               srcSize: size_t,
                               compressOptionsPtr: *const LZ4FCompressOptions)
                               -> size_t;

    // LZ4F_flush()
    // Should you need to create compressed data immediately, without waiting for a block
    // to be be filled, you can call LZ4_flush(), which will immediately compress any remaining
    // data buffered within compressionContext.
    // The LZ4F_compressOptions_t structure is optional : you can provide NULL as argument.
    // The result of the function is the number of bytes written into dstBuffer
    // (it can be zero, this means there was no data left within compressionContext)
    // The function outputs an error code if it fails (can be tested using LZ4F_isError())
    //
    // size_t LZ4F_flush(LZ4F_compressionContext_t compressionContext,
    //                   void* dstBuffer,
    //                   size_t dstMaxSize,
    //                   const LZ4F_compressOptions_t* compressOptionsPtr);
    pub fn LZ4F_flush(ctx: LZ4FCompressionContext,
                      dstBuffer: *mut u8,
                      dstMaxSize: size_t,
                      compressOptionsPtr: *const LZ4FCompressOptions)
                      -> LZ4FErrorCode;

    // LZ4F_compressEnd()
    // When you want to properly finish the compressed frame, just call LZ4F_compressEnd().
    // It will flush whatever data remained within compressionContext (like LZ4_flush())
    // but also properly finalize the frame, with an endMark and a checksum.
    // The result of the function is the number of bytes written into dstBuffer
    // (necessarily >= 4 (endMark size))
    // The function outputs an error code if it fails (can be tested using LZ4F_isError())
    // The LZ4F_compressOptions_t structure is optional : you can provide NULL as argument.
    // compressionContext can then be used again, starting with LZ4F_compressBegin().
    //
    // size_t LZ4F_compressEnd(LZ4F_compressionContext_t compressionContext,
    //                         void* dstBuffer,
    //                         size_t dstMaxSize,
    //                         const LZ4F_compressOptions_t* compressOptionsPtr);
    pub fn LZ4F_compressEnd(ctx: LZ4FCompressionContext,
                            dstBuffer: *mut u8,
                            dstMaxSize: size_t,
                            compressOptionsPtr: *const LZ4FCompressOptions)
                            -> LZ4FErrorCode;

    // LZ4F_createDecompressionContext() :
    // The first thing to do is to create a decompressionContext object, which will be used
    // in all decompression operations.
    // This is achieved using LZ4F_createDecompressionContext().
    // The version provided MUST be LZ4F_VERSION. It is intended to track potential version
    // differences between different binaries.
    // The function will provide a pointer to a fully allocated and initialized
    // LZ4F_decompressionContext_t object.
    // If the result LZ4F_errorCode_t is not OK_NoError, there was an error during
    // context creation.
    // Object can release its memory using LZ4F_freeDecompressionContext();
    //
    // LZ4F_errorCode_t LZ4F_createDecompressionContext(LZ4F_decompressionContext_t* ctxPtr,
    //                                                  unsigned version);
    pub fn LZ4F_createDecompressionContext(ctx: &mut LZ4FDecompressionContext,
                                           version: c_uint)
                                           -> LZ4FErrorCode;

    // LZ4F_errorCode_t LZ4F_freeDecompressionContext(LZ4F_decompressionContext_t ctx);
    pub fn LZ4F_freeDecompressionContext(ctx: LZ4FDecompressionContext) -> LZ4FErrorCode;

    // LZ4F_getFrameInfo()
    // This function decodes frame header information, such as blockSize.
    // It is optional : you could start by calling directly LZ4F_decompress() instead.
    // The objective is to extract header information without starting decompression, typically
    // for allocation purposes.
    // LZ4F_getFrameInfo() can also be used *after* starting decompression, on a
    // valid LZ4F_decompressionContext_t.
    // The number of bytes read from srcBuffer will be provided within *srcSizePtr
    // (necessarily <= original value).
    // You are expected to resume decompression from where it stopped (srcBuffer + *srcSizePtr)
    // The function result is an hint of how many srcSize bytes LZ4F_decompress() expects for
    // next call, or an error code which can be tested using LZ4F_isError().
    //
    // size_t LZ4F_getFrameInfo(LZ4F_decompressionContext_t ctx,
    // 					LZ4F_frameInfo_t* frameInfoPtr,
    // 					const void* srcBuffer, size_t* srcSizePtr);
    pub fn LZ4F_getFrameInfo(ctx: LZ4FDecompressionContext,
                             frameInfoPtr: &mut LZ4FFrameInfo,
                             srcBuffer: *const u8,
                             srcSizePtr: &mut size_t)
                             -> LZ4FErrorCode;

    // LZ4F_decompress()
    // Call this function repetitively to regenerate data compressed within srcBuffer.
    // The function will attempt to decode *srcSizePtr bytes from srcBuffer, into dstBuffer of
    // maximum size *dstSizePtr.
    //
    // The number of bytes regenerated into dstBuffer will be provided within *dstSizePtr
    // (necessarily <= original value).
    //
    // The number of bytes read from srcBuffer will be provided within *srcSizePtr
    // (necessarily <= original value).
    // If number of bytes read is < number of bytes provided, then decompression operation
    // is not completed. It typically happens when dstBuffer is not large enough to contain
    // all decoded data.
    // LZ4F_decompress() must be called again, starting from where it stopped
    // (srcBuffer + *srcSizePtr)
    // The function will check this condition, and refuse to continue if it is not respected.
    //
    // dstBuffer is supposed to be flushed between each call to the function, since its content
    // will be overwritten.
    // dst arguments can be changed at will with each consecutive call to the function.
    //
    // The function result is an hint of how many srcSize bytes LZ4F_decompress() expects for
    // next call.
    // Schematically, it's the size of the current (or remaining) compressed block + header of
    // next block.
    // Respecting the hint provides some boost to performance, since it does skip intermediate
    // buffers.
    // This is just a hint, you can always provide any srcSize you want.
    // When a frame is fully decoded, the function result will be 0. (no more data expected)
    // If decompression failed, function result is an error code, which can be tested
    // using LZ4F_isError().
    //
    // size_t LZ4F_decompress(LZ4F_decompressionContext_t ctx,
    //                        void* dstBuffer, size_t* dstSizePtr,
    //                        const void* srcBuffer, size_t* srcSizePtr,
    //                        const LZ4F_decompressOptions_t* optionsPtr);
    pub fn LZ4F_decompress(ctx: LZ4FDecompressionContext,
                           dstBuffer: *mut u8,
                           dstSizePtr: &mut size_t,
                           srcBuffer: *const u8,
                           srcSizePtr: &mut size_t,
                           optionsPtr: *const LZ4FDecompressOptions)
                           -> LZ4FErrorCode;

    // int LZ4_versionNumber(void)
    pub fn LZ4_versionNumber() -> c_int;

    // int LZ4_compressBound(int isize)
    pub fn LZ4_compressBound(size: c_int) -> c_int;

    // LZ4_stream_t* LZ4_createStream(void)
    pub fn LZ4_createStream() -> *mut LZ4StreamEncode;

    // int LZ4_compress_continue(LZ4_stream_t* LZ4_streamPtr,
    //                           const char* source,
    //                           char* dest,
    //                           int inputSize)
    pub fn LZ4_compress_continue(LZ4_stream: *mut LZ4StreamEncode,
                                 source: *const u8,
                                 dest: *mut u8,
                                 input_size: c_int)
                                 -> c_int;

    // int LZ4_freeStream(LZ4_stream_t* LZ4_streamPtr)
    pub fn LZ4_freeStream(LZ4_stream: *mut LZ4StreamEncode) -> c_int;

    // LZ4_streamDecode_t* LZ4_createStreamDecode(void)
    pub fn LZ4_createStreamDecode() -> *mut LZ4StreamDecode;

    // int LZ4_decompress_safe_continue(LZ4_streamDecode_t* LZ4_streamDecode,
    //                                  const char* source,
    //                                  char* dest,
    //                                  int compressedSize,
    //                                  int maxDecompressedSize)
    pub fn LZ4_decompress_safe_continue(LZ4_stream: *mut LZ4StreamDecode,
                                        source: *const u8,
                                        dest: *mut u8,
                                        compressed_size: c_int,
                                        max_decompressed_size: c_int)
                                        -> c_int;

    // int LZ4_freeStreamDecode(LZ4_streamDecode_t* LZ4_stream)
    pub fn LZ4_freeStreamDecode(LZ4_stream: *mut LZ4StreamDecode) -> c_int;

}

#[test]
fn test_version_number() {
    unsafe { LZ4_versionNumber(); }
}