//! Types for working with [`File`].
//!
//! [`File`]: File

use self::State::*;
use crate::fs::{asyncify, sys};
use crate::io::blocking::Buf;
use crate::io::{AsyncRead, AsyncSeek, AsyncWrite};

use std::fmt;
use std::fs::{Metadata, Permissions};
use std::future::Future;
use std::io::{self, Seek, SeekFrom};
use std::path::Path;
use std::pin::Pin;
use std::sync::Arc;
use std::task::Context;
use std::task::Poll;
use std::task::Poll::*;

/// A reference to an open file on the filesystem.
///
/// This is a specialized version of [`std::fs::File`][std] for usage from the
/// Tokio runtime.
///
/// An instance of a `File` can be read and/or written depending on what options
/// it was opened with. Files also implement [`AsyncSeek`] to alter the logical
/// cursor that the file contains internally.
///
/// A file will not be closed immediately when it goes out of scope if there
/// are any IO operations that have not yet completed. To ensure that a file is
/// closed immediately when it is dropped, you should call [`flush`] before
/// dropping it. Note that this does not ensure that the file has been fully
/// written to disk; the operating system might keep the changes around in an
/// in-memory buffer. See the [`sync_all`] method for telling the OS to write
/// the data to disk.
///
/// Reading and writing to a `File` is usually done using the convenience
/// methods found on the [`AsyncReadExt`] and [`AsyncWriteExt`] traits. Examples
/// import these traits through [the prelude].
///
/// [std]: struct@std::fs::File
/// [`AsyncSeek`]: trait@crate::io::AsyncSeek
/// [`flush`]: fn@crate::io::AsyncWriteExt::flush
/// [`sync_all`]: fn@crate::fs::File::sync_all
/// [`AsyncReadExt`]: trait@crate::io::AsyncReadExt
/// [`AsyncWriteExt`]: trait@crate::io::AsyncWriteExt
/// [the prelude]: crate::prelude
///
/// # Examples
///
/// Create a new file and asynchronously write bytes to it:
///
/// ```no_run
/// use tokio::fs::File;
/// use tokio::prelude::*; // for write_all()
///
/// # async fn dox() -> std::io::Result<()> {
/// let mut file = File::create("foo.txt").await?;
/// file.write_all(b"hello, world!").await?;
/// # Ok(())
/// # }
/// ```
///
/// Read the contents of a file into a buffer
///
/// ```no_run
/// use tokio::fs::File;
/// use tokio::prelude::*; // for read_to_end()
///
/// # async fn dox() -> std::io::Result<()> {
/// let mut file = File::open("foo.txt").await?;
///
/// let mut contents = vec![];
/// file.read_to_end(&mut contents).await?;
///
/// println!("len = {}", contents.len());
/// # Ok(())
/// # }
/// ```
pub struct File {
    std: Arc<sys::File>,
    state: State,

    /// Errors from writes/flushes are returned in write/flush calls. If a write
    /// error is observed while performing a read, it is saved until the next
    /// write / flush call.
    last_write_err: Option<io::ErrorKind>,
}

#[derive(Debug)]
enum State {
    Idle(Option<Buf>),
    Busy(sys::Blocking<(Operation, Buf)>),
}

#[derive(Debug)]
enum Operation {
    Read(io::Result<usize>),
    Write(io::Result<()>),
    Seek(io::Result<u64>),
}

impl File {
    /// Attempts to open a file in read-only mode.
    ///
    /// See [`OpenOptions`] for more details.
    ///
    /// [`OpenOptions`]: super::OpenOptions
    ///
    /// # Errors
    ///
    /// This function will return an error if called from outside of the Tokio
    /// runtime or if path does not already exist. Other errors may also be
    /// returned according to OpenOptions::open.
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::fs::File;
    /// use tokio::prelude::*;
    ///
    /// # async fn dox() -> std::io::Result<()> {
    /// let mut file = File::open("foo.txt").await?;
    ///
    /// let mut contents = vec![];
    /// file.read_to_end(&mut contents).await?;
    ///
    /// println!("len = {}", contents.len());
    /// # Ok(())
    /// # }
    /// ```
    ///
    /// The [`read_to_end`] method is defined on the [`AsyncReadExt`] trait.
    ///
    /// [`read_to_end`]: fn@crate::io::AsyncReadExt::read_to_end
    /// [`AsyncReadExt`]: trait@crate::io::AsyncReadExt
    pub async fn open(path: impl AsRef<Path>) -> io::Result<File> {
        let path = path.as_ref().to_owned();
        let std = asyncify(|| sys::File::open(path)).await?;

        Ok(File::from_std(std))
    }

    /// Opens a file in write-only mode.
    ///
    /// This function will create a file if it does not exist, and will truncate
    /// it if it does.
    ///
    /// See [`OpenOptions`] for more details.
    ///
    /// [`OpenOptions`]: super::OpenOptions
    ///
    /// # Errors
    ///
    /// Results in an error if called from outside of the Tokio runtime or if
    /// the underlying [`create`] call results in an error.
    ///
    /// [`create`]: std::fs::File::create
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::fs::File;
    /// use tokio::prelude::*;
    ///
    /// # async fn dox() -> std::io::Result<()> {
    /// let mut file = File::create("foo.txt").await?;
    /// file.write_all(b"hello, world!").await?;
    /// # Ok(())
    /// # }
    /// ```
    ///
    /// The [`write_all`] method is defined on the [`AsyncWriteExt`] trait.
    ///
    /// [`write_all`]: fn@crate::io::AsyncWriteExt::write_all
    /// [`AsyncWriteExt`]: trait@crate::io::AsyncWriteExt
    pub async fn create(path: impl AsRef<Path>) -> io::Result<File> {
        let path = path.as_ref().to_owned();
        let std_file = asyncify(move || sys::File::create(path)).await?;
        Ok(File::from_std(std_file))
    }

    /// Converts a [`std::fs::File`][std] to a [`tokio::fs::File`][file].
    ///
    /// [std]: std::fs::File
    /// [file]: File
    ///
    /// # Examples
    ///
    /// ```no_run
    /// // This line could block. It is not recommended to do this on the Tokio
    /// // runtime.
    /// let std_file = std::fs::File::open("foo.txt").unwrap();
    /// let file = tokio::fs::File::from_std(std_file);
    /// ```
    pub fn from_std(std: sys::File) -> File {
        File {
            std: Arc::new(std),
            state: State::Idle(Some(Buf::with_capacity(0))),
            last_write_err: None,
        }
    }

    /// Seeks to an offset, in bytes, in a stream.
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::fs::File;
    /// use tokio::prelude::*;
    ///
    /// use std::io::SeekFrom;
    ///
    /// # async fn dox() -> std::io::Result<()> {
    /// let mut file = File::open("foo.txt").await?;
    /// file.seek(SeekFrom::Start(6)).await?;
    ///
    /// let mut contents = vec![0u8; 10];
    /// file.read_exact(&mut contents).await?;
    /// # Ok(())
    /// # }
    /// ```
    ///
    /// The [`read_exact`] method is defined on the [`AsyncReadExt`] trait.
    ///
    /// [`read_exact`]: fn@crate::io::AsyncReadExt::read_exact
    /// [`AsyncReadExt`]: trait@crate::io::AsyncReadExt
    pub async fn seek(&mut self, mut pos: SeekFrom) -> io::Result<u64> {
        self.complete_inflight().await;

        let mut buf = match self.state {
            Idle(ref mut buf_cell) => buf_cell.take().unwrap(),
            _ => unreachable!(),
        };

        // Factor in any unread data from the buf
        if !buf.is_empty() {
            let n = buf.discard_read();

            if let SeekFrom::Current(ref mut offset) = pos {
                *offset += n;
            }
        }

        let std = self.std.clone();

        // Start the operation
        self.state = Busy(sys::run(move || {
            let res = (&*std).seek(pos);
            (Operation::Seek(res), buf)
        }));

        let (op, buf) = match self.state {
            Idle(_) => unreachable!(),
            Busy(ref mut rx) => rx.await.unwrap(),
        };

        self.state = Idle(Some(buf));

        match op {
            Operation::Seek(res) => res,
            _ => unreachable!(),
        }
    }

    /// Attempts to sync all OS-internal metadata to disk.
    ///
    /// This function will attempt to ensure that all in-core data reaches the
    /// filesystem before returning.
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::fs::File;
    /// use tokio::prelude::*;
    ///
    /// # async fn dox() -> std::io::Result<()> {
    /// let mut file = File::create("foo.txt").await?;
    /// file.write_all(b"hello, world!").await?;
    /// file.sync_all().await?;
    /// # Ok(())
    /// # }
    /// ```
    ///
    /// The [`write_all`] method is defined on the [`AsyncWriteExt`] trait.
    ///
    /// [`write_all`]: fn@crate::io::AsyncWriteExt::write_all
    /// [`AsyncWriteExt`]: trait@crate::io::AsyncWriteExt
    pub async fn sync_all(&mut self) -> io::Result<()> {
        self.complete_inflight().await;

        let std = self.std.clone();
        asyncify(move || std.sync_all()).await
    }

    /// This function is similar to `sync_all`, except that it may not
    /// synchronize file metadata to the filesystem.
    ///
    /// This is intended for use cases that must synchronize content, but don't
    /// need the metadata on disk. The goal of this method is to reduce disk
    /// operations.
    ///
    /// Note that some platforms may simply implement this in terms of `sync_all`.
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::fs::File;
    /// use tokio::prelude::*;
    ///
    /// # async fn dox() -> std::io::Result<()> {
    /// let mut file = File::create("foo.txt").await?;
    /// file.write_all(b"hello, world!").await?;
    /// file.sync_data().await?;
    /// # Ok(())
    /// # }
    /// ```
    ///
    /// The [`write_all`] method is defined on the [`AsyncWriteExt`] trait.
    ///
    /// [`write_all`]: fn@crate::io::AsyncWriteExt::write_all
    /// [`AsyncWriteExt`]: trait@crate::io::AsyncWriteExt
    pub async fn sync_data(&mut self) -> io::Result<()> {
        self.complete_inflight().await;

        let std = self.std.clone();
        asyncify(move || std.sync_data()).await
    }

    /// Truncates or extends the underlying file, updating the size of this file to become size.
    ///
    /// If the size is less than the current file's size, then the file will be
    /// shrunk. If it is greater than the current file's size, then the file
    /// will be extended to size and have all of the intermediate data filled in
    /// with 0s.
    ///
    /// # Errors
    ///
    /// This function will return an error if the file is not opened for
    /// writing.
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::fs::File;
    /// use tokio::prelude::*;
    ///
    /// # async fn dox() -> std::io::Result<()> {
    /// let mut file = File::create("foo.txt").await?;
    /// file.write_all(b"hello, world!").await?;
    /// file.set_len(10).await?;
    /// # Ok(())
    /// # }
    /// ```
    ///
    /// The [`write_all`] method is defined on the [`AsyncWriteExt`] trait.
    ///
    /// [`write_all`]: fn@crate::io::AsyncWriteExt::write_all
    /// [`AsyncWriteExt`]: trait@crate::io::AsyncWriteExt
    pub async fn set_len(&mut self, size: u64) -> io::Result<()> {
        self.complete_inflight().await;

        let mut buf = match self.state {
            Idle(ref mut buf_cell) => buf_cell.take().unwrap(),
            _ => unreachable!(),
        };

        let seek = if !buf.is_empty() {
            Some(SeekFrom::Current(buf.discard_read()))
        } else {
            None
        };

        let std = self.std.clone();

        self.state = Busy(sys::run(move || {
            let res = if let Some(seek) = seek {
                (&*std).seek(seek).and_then(|_| std.set_len(size))
            } else {
                std.set_len(size)
            }
            .map(|_| 0); // the value is discarded later

            // Return the result as a seek
            (Operation::Seek(res), buf)
        }));

        let (op, buf) = match self.state {
            Idle(_) => unreachable!(),
            Busy(ref mut rx) => rx.await?,
        };

        self.state = Idle(Some(buf));

        match op {
            Operation::Seek(res) => res.map(|_| ()),
            _ => unreachable!(),
        }
    }

    /// Queries metadata about the underlying file.
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::fs::File;
    ///
    /// # async fn dox() -> std::io::Result<()> {
    /// let file = File::open("foo.txt").await?;
    /// let metadata = file.metadata().await?;
    ///
    /// println!("{:?}", metadata);
    /// # Ok(())
    /// # }
    /// ```
    pub async fn metadata(&self) -> io::Result<Metadata> {
        let std = self.std.clone();
        asyncify(move || std.metadata()).await
    }

    /// Create a new `File` instance that shares the same underlying file handle
    /// as the existing `File` instance. Reads, writes, and seeks will affect both
    /// File instances simultaneously.
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::fs::File;
    ///
    /// # async fn dox() -> std::io::Result<()> {
    /// let file = File::open("foo.txt").await?;
    /// let file_clone = file.try_clone().await?;
    /// # Ok(())
    /// # }
    /// ```
    pub async fn try_clone(&self) -> io::Result<File> {
        let std = self.std.clone();
        let std_file = asyncify(move || std.try_clone()).await?;
        Ok(File::from_std(std_file))
    }

    /// Destructures `File` into a [`std::fs::File`][std]. This function is
    /// async to allow any in-flight operations to complete.
    ///
    /// Use `File::try_into_std` to attempt conversion immediately.
    ///
    /// [std]: std::fs::File
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::fs::File;
    ///
    /// # async fn dox() -> std::io::Result<()> {
    /// let tokio_file = File::open("foo.txt").await?;
    /// let std_file = tokio_file.into_std().await;
    /// # Ok(())
    /// # }
    /// ```
    pub async fn into_std(mut self) -> sys::File {
        self.complete_inflight().await;
        Arc::try_unwrap(self.std).expect("Arc::try_unwrap failed")
    }

    /// Tries to immediately destructure `File` into a [`std::fs::File`][std].
    ///
    /// [std]: std::fs::File
    ///
    /// # Errors
    ///
    /// This function will return an error containing the file if some
    /// operation is in-flight.
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::fs::File;
    ///
    /// # async fn dox() -> std::io::Result<()> {
    /// let tokio_file = File::open("foo.txt").await?;
    /// let std_file = tokio_file.try_into_std().unwrap();
    /// # Ok(())
    /// # }
    /// ```
    pub fn try_into_std(mut self) -> Result<sys::File, Self> {
        match Arc::try_unwrap(self.std) {
            Ok(file) => Ok(file),
            Err(std_file_arc) => {
                self.std = std_file_arc;
                Err(self)
            }
        }
    }

    /// Changes the permissions on the underlying file.
    ///
    /// # Platform-specific behavior
    ///
    /// This function currently corresponds to the `fchmod` function on Unix and
    /// the `SetFileInformationByHandle` function on Windows. Note that, this
    /// [may change in the future][changes].
    ///
    /// [changes]: https://doc.rust-lang.org/std/io/index.html#platform-specific-behavior
    ///
    /// # Errors
    ///
    /// This function will return an error if the user lacks permission change
    /// attributes on the underlying file. It may also return an error in other
    /// os-specific unspecified cases.
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::fs::File;
    ///
    /// # async fn dox() -> std::io::Result<()> {
    /// let file = File::open("foo.txt").await?;
    /// let mut perms = file.metadata().await?.permissions();
    /// perms.set_readonly(true);
    /// file.set_permissions(perms).await?;
    /// # Ok(())
    /// # }
    /// ```
    pub async fn set_permissions(&self, perm: Permissions) -> io::Result<()> {
        let std = self.std.clone();
        asyncify(move || std.set_permissions(perm)).await
    }

    async fn complete_inflight(&mut self) {
        use crate::future::poll_fn;

        if let Err(e) = poll_fn(|cx| Pin::new(&mut *self).poll_flush(cx)).await {
            self.last_write_err = Some(e.kind());
        }
    }
}

impl AsyncRead for File {
    unsafe fn prepare_uninitialized_buffer(&self, _buf: &mut [std::mem::MaybeUninit<u8>]) -> bool {
        // https://github.com/rust-lang/rust/blob/09c817eeb29e764cfc12d0a8d94841e3ffe34023/src/libstd/fs.rs#L668
        false
    }

    fn poll_read(
        mut self: Pin<&mut Self>,
        cx: &mut Context<'_>,
        dst: &mut [u8],
    ) -> Poll<io::Result<usize>> {
        loop {
            match self.state {
                Idle(ref mut buf_cell) => {
                    let mut buf = buf_cell.take().unwrap();

                    if !buf.is_empty() {
                        let n = buf.copy_to(dst);
                        *buf_cell = Some(buf);
                        return Ready(Ok(n));
                    }

                    buf.ensure_capacity_for(dst);
                    let std = self.std.clone();

                    self.state = Busy(sys::run(move || {
                        let res = buf.read_from(&mut &*std);
                        (Operation::Read(res), buf)
                    }));
                }
                Busy(ref mut rx) => {
                    let (op, mut buf) = ready!(Pin::new(rx).poll(cx))?;

                    match op {
                        Operation::Read(Ok(_)) => {
                            let n = buf.copy_to(dst);
                            self.state = Idle(Some(buf));
                            return Ready(Ok(n));
                        }
                        Operation::Read(Err(e)) => {
                            assert!(buf.is_empty());

                            self.state = Idle(Some(buf));
                            return Ready(Err(e));
                        }
                        Operation::Write(Ok(_)) => {
                            assert!(buf.is_empty());
                            self.state = Idle(Some(buf));
                            continue;
                        }
                        Operation::Write(Err(e)) => {
                            assert!(self.last_write_err.is_none());
                            self.last_write_err = Some(e.kind());
                            self.state = Idle(Some(buf));
                        }
                        Operation::Seek(_) => {
                            assert!(buf.is_empty());
                            self.state = Idle(Some(buf));
                            continue;
                        }
                    }
                }
            }
        }
    }
}

impl AsyncSeek for File {
    fn start_seek(
        mut self: Pin<&mut Self>,
        cx: &mut Context<'_>,
        mut pos: SeekFrom,
    ) -> Poll<io::Result<()>> {
        loop {
            match self.state {
                Idle(ref mut buf_cell) => {
                    let mut buf = buf_cell.take().unwrap();

                    // Factor in any unread data from the buf
                    if !buf.is_empty() {
                        let n = buf.discard_read();

                        if let SeekFrom::Current(ref mut offset) = pos {
                            *offset += n;
                        }
                    }

                    let std = self.std.clone();

                    self.state = Busy(sys::run(move || {
                        let res = (&*std).seek(pos);
                        (Operation::Seek(res), buf)
                    }));

                    return Ready(Ok(()));
                }
                Busy(ref mut rx) => {
                    let (op, buf) = ready!(Pin::new(rx).poll(cx))?;
                    self.state = Idle(Some(buf));

                    match op {
                        Operation::Read(_) => {}
                        Operation::Write(Err(e)) => {
                            assert!(self.last_write_err.is_none());
                            self.last_write_err = Some(e.kind());
                        }
                        Operation::Write(_) => {}
                        Operation::Seek(_) => {}
                    }
                }
            }
        }
    }

    fn poll_complete(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<io::Result<u64>> {
        loop {
            match self.state {
                Idle(_) => panic!("must call start_seek before calling poll_complete"),
                Busy(ref mut rx) => {
                    let (op, buf) = ready!(Pin::new(rx).poll(cx))?;
                    self.state = Idle(Some(buf));

                    match op {
                        Operation::Read(_) => {}
                        Operation::Write(Err(e)) => {
                            assert!(self.last_write_err.is_none());
                            self.last_write_err = Some(e.kind());
                        }
                        Operation::Write(_) => {}
                        Operation::Seek(res) => return Ready(res),
                    }
                }
            }
        }
    }
}

impl AsyncWrite for File {
    fn poll_write(
        mut self: Pin<&mut Self>,
        cx: &mut Context<'_>,
        src: &[u8],
    ) -> Poll<io::Result<usize>> {
        if let Some(e) = self.last_write_err.take() {
            return Ready(Err(e.into()));
        }

        loop {
            match self.state {
                Idle(ref mut buf_cell) => {
                    let mut buf = buf_cell.take().unwrap();

                    let seek = if !buf.is_empty() {
                        Some(SeekFrom::Current(buf.discard_read()))
                    } else {
                        None
                    };

                    let n = buf.copy_from(src);
                    let std = self.std.clone();

                    self.state = Busy(sys::run(move || {
                        let res = if let Some(seek) = seek {
                            (&*std).seek(seek).and_then(|_| buf.write_to(&mut &*std))
                        } else {
                            buf.write_to(&mut &*std)
                        };

                        (Operation::Write(res), buf)
                    }));

                    return Ready(Ok(n));
                }
                Busy(ref mut rx) => {
                    let (op, buf) = ready!(Pin::new(rx).poll(cx))?;
                    self.state = Idle(Some(buf));

                    match op {
                        Operation::Read(_) => {
                            // We don't care about the result here. The fact
                            // that the cursor has advanced will be reflected in
                            // the next iteration of the loop
                            continue;
                        }
                        Operation::Write(res) => {
                            // If the previous write was successful, continue.
                            // Otherwise, error.
                            res?;
                            continue;
                        }
                        Operation::Seek(_) => {
                            // Ignore the seek
                            continue;
                        }
                    }
                }
            }
        }
    }

    fn poll_flush(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<(), io::Error>> {
        if let Some(e) = self.last_write_err.take() {
            return Ready(Err(e.into()));
        }

        let (op, buf) = match self.state {
            Idle(_) => return Ready(Ok(())),
            Busy(ref mut rx) => ready!(Pin::new(rx).poll(cx))?,
        };

        // The buffer is not used here
        self.state = Idle(Some(buf));

        match op {
            Operation::Read(_) => Ready(Ok(())),
            Operation::Write(res) => Ready(res),
            Operation::Seek(_) => Ready(Ok(())),
        }
    }

    fn poll_shutdown(self: Pin<&mut Self>, _cx: &mut Context<'_>) -> Poll<Result<(), io::Error>> {
        Poll::Ready(Ok(()))
    }
}

impl From<sys::File> for File {
    fn from(std: sys::File) -> Self {
        Self::from_std(std)
    }
}

impl fmt::Debug for File {
    fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
        fmt.debug_struct("tokio::fs::File")
            .field("std", &self.std)
            .finish()
    }
}

#[cfg(unix)]
impl std::os::unix::io::AsRawFd for File {
    fn as_raw_fd(&self) -> std::os::unix::io::RawFd {
        self.std.as_raw_fd()
    }
}

#[cfg(windows)]
impl std::os::windows::io::AsRawHandle for File {
    fn as_raw_handle(&self) -> std::os::windows::io::RawHandle {
        self.std.as_raw_handle()
    }
}