Struct openssl::ssl::SslVerifyMode

pub struct SslVerifyMode { /* fields omitted */ }

Options controling the behavior of certificate verification.

Implementations

impl SslVerifyMode

pub const PEER: SslVerifyMode

Verifies that the peer’s certificate is trusted.

On the server side, this will cause OpenSSL to request a certificate from the client.

pub const NONE: SslVerifyMode

Disables verification of the peer’s certificate.

On the server side, this will cause OpenSSL to not request a certificate from the client. On the client side, the certificate will be checked for validity, but the negotiation will continue regardless of the result of that check.

pub const FAIL_IF_NO_PEER_CERT: SslVerifyMode

On the server side, abort the handshake if the client did not send a certificate.

This should be paired with SSL_VERIFY_PEER. It has no effect on the client side.

pub const fn empty() -> SslVerifyMode

Returns an empty set of flags

pub const fn all() -> SslVerifyMode

Returns the set containing all flags.

pub const fn bits(&self) -> i32

Returns the raw value of the flags currently stored.

pub fn from_bits(bits: i32) -> Option<SslVerifyMode>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: i32) -> SslVerifyMode

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: i32) -> SslVerifyMode

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: SslVerifyMode) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: SslVerifyMode) -> bool

Returns true all of the flags in other are contained within self.

pub fn insert(&mut self, other: SslVerifyMode)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: SslVerifyMode)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: SslVerifyMode)

Toggles the specified flags in-place.

pub fn set(&mut self, other: SslVerifyMode, value: bool)

Inserts or removes the specified flags depending on the passed value.

Trait Implementations

impl Binary for SslVerifyMode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd<SslVerifyMode> for SslVerifyMode

type Output = SslVerifyMode

The resulting type after applying the & operator.

fn bitand(self, other: SslVerifyMode) -> SslVerifyMode

Returns the intersection between the two sets of flags.

impl BitAndAssign<SslVerifyMode> for SslVerifyMode

fn bitand_assign(&mut self, other: SslVerifyMode)

Disables all flags disabled in the set.

impl BitOr<SslVerifyMode> for SslVerifyMode

type Output = SslVerifyMode

The resulting type after applying the | operator.

fn bitor(self, other: SslVerifyMode) -> SslVerifyMode

Returns the union of the two sets of flags.

impl BitOrAssign<SslVerifyMode> for SslVerifyMode

fn bitor_assign(&mut self, other: SslVerifyMode)

Adds the set of flags.

impl BitXor<SslVerifyMode> for SslVerifyMode

type Output = SslVerifyMode

The resulting type after applying the ^ operator.

fn bitxor(self, other: SslVerifyMode) -> SslVerifyMode

Returns the left flags, but with all the right flags toggled.

impl BitXorAssign<SslVerifyMode> for SslVerifyMode

fn bitxor_assign(&mut self, other: SslVerifyMode)

Toggles the set of flags.

impl Clone for SslVerifyMode

fn clone(&self) -> SslVerifyMode

Returns a copy of the value.

pub fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for SslVerifyMode

impl Debug for SslVerifyMode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Eq for SslVerifyMode

impl Extend<SslVerifyMode> for SslVerifyMode

fn extend<T: IntoIterator<Item = SslVerifyMode>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

pub fn extend_one(&mut self, item: A)

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

pub fn extend_reserve(&mut self, additional: usize)

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<SslVerifyMode> for SslVerifyMode

fn from_iter<T: IntoIterator<Item = SslVerifyMode>>(
    iterator: T
) -> SslVerifyMode

Creates a value from an iterator.

impl Hash for SslVerifyMode

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

pub fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl LowerHex for SslVerifyMode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for SslVerifyMode

type Output = SslVerifyMode

The resulting type after applying the ! operator.

fn not(self) -> SslVerifyMode

Returns the complement of this set of flags.

impl Octal for SslVerifyMode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for SslVerifyMode

fn cmp(&self, other: &SslVerifyMode) -> Ordering

This method returns an Ordering between self and other.

#[must_use]pub fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]pub fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]pub fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl PartialEq<SslVerifyMode> for SslVerifyMode

fn eq(&self, other: &SslVerifyMode) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &SslVerifyMode) -> bool

This method tests for !=.

impl PartialOrd<SslVerifyMode> for SslVerifyMode

fn partial_cmp(&self, other: &SslVerifyMode) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use]pub fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use]pub fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use]pub fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use]pub fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl StructuralEq for SslVerifyMode

impl StructuralPartialEq for SslVerifyMode

impl Sub<SslVerifyMode> for SslVerifyMode

type Output = SslVerifyMode

The resulting type after applying the - operator.

fn sub(self, other: SslVerifyMode) -> SslVerifyMode

Returns the set difference of the two sets of flags.

impl SubAssign<SslVerifyMode> for SslVerifyMode

fn sub_assign(&mut self, other: SslVerifyMode)

Disables all flags enabled in the set.

impl UpperHex for SslVerifyMode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.