Crate raft[−][src]

Creating a Raft node

You can use RawNode::new to create the Raft node. To create the Raft node, you need to provide a Storage component, and a Config to the RawNode::new function.

use raft::{
    Config,
    storage::MemStorage,
    raw_node::RawNode,
};
use slog::{Drain, o};

// Select some defaults, then change what we need.
let config = Config {
    id: 1,
    ..Default::default()
};
// Initialize logger.
let logger = slog::Logger::root(slog_stdlog::StdLog.fuse(), o!());
// ... Make any configuration changes.
// After, make sure it's valid!
config.validate().unwrap();
// We'll use the built-in `MemStorage`, but you will likely want your own.
// Finally, create our Raft node!
let storage = MemStorage::new_with_conf_state((vec![1], vec![]));
let mut node = RawNode::new(&config, storage, &logger).unwrap();

Ticking the Raft node

Use a timer to tick the Raft node at regular intervals. See the following example using Rust channel recv_timeout to drive the Raft node at least every 100ms, calling tick() each time.

use std::{sync::mpsc::{channel, RecvTimeoutError}, time::{Instant, Duration}};

// We're using a channel, but this could be any stream of events.
let (tx, rx) = channel();
let timeout = Duration::from_millis(100);
let mut remaining_timeout = timeout;

// Send the `tx` somewhere else...

loop {
    let now = Instant::now();

    match rx.recv_timeout(remaining_timeout) {
        Ok(()) => {
            // Let's save this for later.
            unimplemented!()
        },
        Err(RecvTimeoutError::Timeout) => (),
        Err(RecvTimeoutError::Disconnected) => unimplemented!(),
    }

    let elapsed = now.elapsed();
    if elapsed >= remaining_timeout {
        remaining_timeout = timeout;
        // We drive Raft every 100ms.
        node.tick();
    } else {
        remaining_timeout -= elapsed;
    }
}

Proposing to, and stepping the Raft node

Using the propose function you can drive the Raft node when the client sends a request to the Raft server. You can call propose to add the request to the Raft log explicitly.

In most cases, the client needs to wait for a response for the request. For example, if the client writes a value to a key and wants to know whether the write succeeds or not, but the write flow is asynchronous in Raft, so the write log entry must be replicated to other followers, then committed and at last applied to the state machine, so here we need a way to notify the client after the write is finished.

One simple way is to use a unique ID for the client request, and save the associated callback function in a hash map. When the log entry is applied, we can get the ID from the decoded entry, call the corresponding callback, and notify the client.

You can call the step function when you receive the Raft messages from other nodes.

Here is a simple example to use propose and step:

enum Msg {
    Propose {
        id: u8,
        callback: Box<dyn Fn() + Send>,
    },
    Raft(Message),
}

// Simulate a message coming down the stream.
tx.send(Msg::Propose { id: 1, callback: Box::new(|| ()) });

let mut cbs = HashMap::new();
loop {
    let now = Instant::now();

    match rx.recv_timeout(remaining_timeout) {
        Ok(Msg::Propose { id, callback }) => {
            cbs.insert(id, callback);
            node.propose(vec![], vec![id]).unwrap();
        }
        Ok(Msg::Raft(m)) => node.step(m).unwrap(),
        Err(RecvTimeoutError::Timeout) => (),
        Err(RecvTimeoutError::Disconnected) => unimplemented!(),
    }

    let elapsed = now.elapsed();
    if elapsed >= remaining_timeout {
        remaining_timeout = timeout;
        // We drive Raft every 100ms.
        node.tick();
    } else {
        remaining_timeout -= elapsed;
    }
    break;
}

In the above example, we use a channel to receive the propose and step messages. We only propose the request ID to the Raft log. In your own practice, you can embed the ID in your request and propose the encoded binary request data.

Processing the `Ready` State

When your Raft node is ticked and running, Raft should enter a Ready state. You need to first use has_ready to check whether Raft is ready. If yes, use the ready function to get a Ready state:

if !node.has_ready() {
    return;
}

// The Raft is ready, we can do something now.
let mut ready = node.ready();

The Ready state contains quite a bit of information, and you need to check and process them one by one:

Check whether messages is empty or not. If not, it means that the node will send messages to other nodes:

if !ready.messages().is_empty() {
    for msg in ready.take_messages() {
        // Send messages to other peers.
    }
}

Check whether snapshot is empty or not. If not empty, it means that the Raft node has received a Raft snapshot from the leader and we must apply the snapshot:

if !ready.snapshot().is_empty() {
    // This is a snapshot, we need to apply the snapshot at first.
    node.mut_store()
        .wl()
        .apply_snapshot(ready.snapshot().clone())
        .unwrap();
}

Check whether committed_entires is empty or not. If not, it means that there are some newly committed log entries which you must apply to the state machine. Of course, after applying, you need to update the applied index and resume apply later:

let mut _last_apply_index = 0;
for entry in ready.take_committed_entries() {
    // Mostly, you need to save the last apply index to resume applying
    // after restart. Here we just ignore this because we use a Memory storage.
    _last_apply_index = entry.index;

    if entry.data.is_empty() {
        // Emtpy entry, when the peer becomes Leader it will send an empty entry.
        continue;
    }

    match entry.get_entry_type() {
        EntryType::EntryNormal => handle_normal(entry),
        // It's recommended to always use `EntryType::EntryConfChangeV2.
        EntryType::EntryConfChange => handle_conf_change(entry),
        EntryType::EntryConfChangeV2 => handle_conf_change_v2(entry),
    }
}

Check whether entries is empty or not. If not empty, it means that there are newly added entries but have not been committed yet, we must append the entries to the Raft log:
```
if !ready.entries().is_empty() {
    // Append entries to the Raft log
    node.mut_store().wl().append(ready.entries()).unwrap();
}
```
Check whether hs is empty or not. If not empty, it means that the HardState of the node has changed. For example, the node may vote for a new leader, or the commit index has been increased. We must persist the changed HardState:
```
if let Some(hs) = ready.hs() {
    // Raft HardState changed, and we need to persist it.
    node.mut_store().wl().set_hardstate(hs.clone());
}
```

Check whether persisted_messages is empty or not. If not, it means that the node will send messages to other nodes after persisting hardstate, entries and snapshot:

if !ready.persisted_messages().is_empty() {
    for msg in ready.take_persisted_messages() {
        // Send persisted messages to other peers.
    }
}

Call advance to notify that the previous work is completed. Get the return value LightReady and handle its messages and committed_entries like step 1 and step 3 does. Then call advance_apply to advance the applied index inside.

let mut light_rd = node.advance(ready);
// Like step 1 and 5, you can use functions to make them behave the same.
handle_messages(light_rd.take_messages());
handle_committed_entries(light_rd.take_committed_entries());
node.advance_apply();

For more information, check out an example.

Arbitrary Membership Changes

When building a resilient, scalable distributed system there is a strong need to be able to change the membership of a peer group dynamically, without downtime. This Raft crate supports this via Joint Consensus (Raft paper, section 6).

It permits resilient arbitrary dynamic membership changes. A membership change can do any or all of the following:

Add peer (learner or voter) n to the group.
Remove a learner n from the group.
Promote a learner to a voter.
Demote a voter back to learner.
Replace a node n with another node m.

For example to promote a learner 4 and demote an existing voter 3:

let steps = vec![
    raft_proto::new_conf_change_single(4, ConfChangeType::AddNode),
    raft_proto::new_conf_change_single(3, ConfChangeType::RemoveNode),
];
let mut cc = ConfChangeV2::default();
cc.set_changes(steps.into());
node.propose_conf_change(vec![], cc).unwrap();
// After the log is committed and applied
// node.apply_conf_change(&cc).unwrap();

This process is a two-phase process, during the midst of it the peer group’s leader is managing two independent, possibly overlapping peer sets.

Note: In order to maintain resiliency guarantees (progress while a majority of both peer sets is active), it is recommended to wait until the entire peer group has exited the transition phase before taking old, removed peers offline.

Re-exports

pub use raft_log::NO_LIMIT;

pub use raw_node::is_empty_snap;

pub use raw_node::LightReady;

pub use raw_node::Peer;

pub use raw_node::RawNode;

pub use raw_node::Ready;

pub use raw_node::SnapshotStatus;

pub use storage::RaftState;

pub use storage::Storage;

pub use util::majority;

Modules

eraftpb	Generated file from `eraftpb.proto`
prelude	A “prelude” for crates using the `raft` crate.
raw_node	The raw node of the raft module.
storage	Represents the storage trait and example implementation.
util	This module contains a collection of various tools to use to manipulate and control messages and data associated with raft.

Structs

Changer	Changer facilitates configuration changes. It exposes methods to handle simple and joint consensus while performing the proper validation that allows refusing invalid configuration changes before they affect the active configuration.
Config	Config contains the parameters to start a raft.
Inflights	A buffer of inflight messages.
JointConfig	A configuration of two groups of (possibly overlapping) majority configurations. Decisions require the support of both majorities.
MajorityConfig	A set of IDs that uses majority quorums to make decisions.
Progress	The progress of catching up from a restart.
ProgressTracker	`ProgressTracker` contains several `Progress`es, which could be `Leader`, `Follower` and `Learner`.
Raft	A struct that represents the raft consensus itself. Stores details concerning the current and possible state the system can take.
RaftLog	Raft log implementation
ReadState	ReadState provides state for read only query. It’s caller’s responsibility to send MsgReadIndex first before getting this state from ready. It’s also caller’s duty to differentiate if this state is what it requests through request_ctx, e.g. given a unique id as request_ctx.
SoftState	SoftState provides state that is useful for logging and debugging. The state is volatile and does not need to be persisted to the WAL.
Status	Represents the current status of the raft
Unstable	The unstable.entries[i] has raft log position i+unstable.offset. Note that unstable.offset may be less than the highest log position in storage; this means that the next write to storage might need to truncate the log before persisting unstable.entries.

Enums

Error	The base error type for raft
ProgressState	The state of the progress.
ReadOnlyOption	Determines the relative safety of and consistency of read only requests.
StateRole	The role of the node.
StorageError	An error with the storage.

Constants

INVALID_ID	A constant represents invalid id of raft.
INVALID_INDEX	A constant represents invalid index of raft log.

Functions

vote_resp_msg_type

Maps vote and pre_vote message types to their correspond responses.

Type Definitions

MapChange	Changes made by `Changer`.
Result	A result type that wraps up the raft errors.

Crate raft⎘[−][src]

Crate raft[−][src]