Struct chrono::offset::FixedOffset

pub struct FixedOffset { /* fields omitted */ }

The time zone with fixed offset, from UTC-23:59:59 to UTC+23:59:59.

Using the TimeZone methods on a FixedOffset struct is the preferred way to construct DateTime<FixedOffset> instances. See the east and west methods for examples.

Implementations

impl FixedOffset

pub fn east(secs: i32) -> FixedOffset

Makes a new FixedOffset for the Eastern Hemisphere with given timezone difference. The negative secs means the Western Hemisphere.

Panics on the out-of-bound secs.

Example

use chrono::{FixedOffset, TimeZone};
let hour = 3600;
let datetime = FixedOffset::east(5 * hour).ymd(2016, 11, 08)
                                          .and_hms(0, 0, 0);
assert_eq!(&datetime.to_rfc3339(), "2016-11-08T00:00:00+05:00")

pub fn east_opt(secs: i32) -> Option<FixedOffset>

Makes a new FixedOffset for the Eastern Hemisphere with given timezone difference. The negative secs means the Western Hemisphere.

Returns None on the out-of-bound secs.

pub fn west(secs: i32) -> FixedOffset

Makes a new FixedOffset for the Western Hemisphere with given timezone difference. The negative secs means the Eastern Hemisphere.

Panics on the out-of-bound secs.

Example

use chrono::{FixedOffset, TimeZone};
let hour = 3600;
let datetime = FixedOffset::west(5 * hour).ymd(2016, 11, 08)
                                          .and_hms(0, 0, 0);
assert_eq!(&datetime.to_rfc3339(), "2016-11-08T00:00:00-05:00")

pub fn west_opt(secs: i32) -> Option<FixedOffset>

Makes a new FixedOffset for the Western Hemisphere with given timezone difference. The negative secs means the Eastern Hemisphere.

Returns None on the out-of-bound secs.

pub fn local_minus_utc(&self) -> i32

Returns the number of seconds to add to convert from UTC to the local time.

pub fn utc_minus_local(&self) -> i32

Returns the number of seconds to add to convert from the local time to UTC.

Trait Implementations

impl Add<FixedOffset> for NaiveTime

type Output = NaiveTime

The resulting type after applying the + operator.

fn add(self, rhs: FixedOffset) -> NaiveTime

Performs the + operation.

impl Add<FixedOffset> for NaiveDateTime

type Output = NaiveDateTime

The resulting type after applying the + operator.

fn add(self, rhs: FixedOffset) -> NaiveDateTime

Performs the + operation.

impl<Tz: TimeZone> Add<FixedOffset> for DateTime<Tz>

type Output = DateTime<Tz>

The resulting type after applying the + operator.

fn add(self, rhs: FixedOffset) -> DateTime<Tz>

Performs the + operation.

impl Clone for FixedOffset

fn clone(&self) -> FixedOffset

Returns a copy of the value.

pub fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for FixedOffset

impl Debug for FixedOffset

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for FixedOffset

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Eq for FixedOffset

impl Hash for FixedOffset

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

pub fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl Offset for FixedOffset

fn fix(&self) -> FixedOffset

Returns the fixed offset from UTC to the local time stored.

impl PartialEq<FixedOffset> for FixedOffset

fn eq(&self, other: &FixedOffset) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &FixedOffset) -> bool

This method tests for !=.

impl StructuralEq for FixedOffset

impl StructuralPartialEq for FixedOffset

impl Sub<FixedOffset> for NaiveTime

type Output = NaiveTime

The resulting type after applying the - operator.

fn sub(self, rhs: FixedOffset) -> NaiveTime

Performs the - operation.

impl Sub<FixedOffset> for NaiveDateTime

type Output = NaiveDateTime

The resulting type after applying the - operator.

fn sub(self, rhs: FixedOffset) -> NaiveDateTime

Performs the - operation.

impl<Tz: TimeZone> Sub<FixedOffset> for DateTime<Tz>

type Output = DateTime<Tz>

The resulting type after applying the - operator.

fn sub(self, rhs: FixedOffset) -> DateTime<Tz>

Performs the - operation.

impl TimeZone for FixedOffset

type Offset = FixedOffset

An associated offset type. This type is used to store the actual offset in date and time types. The original TimeZone value can be recovered via TimeZone::from_offset.

fn from_offset(offset: &FixedOffset) -> FixedOffset

Reconstructs the time zone from the offset.

fn offset_from_local_date(&self, _local: &NaiveDate) -> LocalResult<FixedOffset>

Creates the offset(s) for given local NaiveDate if possible.

fn offset_from_local_datetime(
    &self,
    _local: &NaiveDateTime
) -> LocalResult<FixedOffset>

Creates the offset(s) for given local NaiveDateTime if possible.

fn offset_from_utc_date(&self, _utc: &NaiveDate) -> FixedOffset

Creates the offset for given UTC NaiveDate. This cannot fail.

fn offset_from_utc_datetime(&self, _utc: &NaiveDateTime) -> FixedOffset

Creates the offset for given UTC NaiveDateTime. This cannot fail.

fn ymd(&self, year: i32, month: u32, day: u32) -> Date<Self>

Makes a new Date from year, month, day and the current time zone. This assumes the proleptic Gregorian calendar, with the year 0 being 1 BCE.

fn ymd_opt(&self, year: i32, month: u32, day: u32) -> LocalResult<Date<Self>>

Makes a new Date from year, month, day and the current time zone. This assumes the proleptic Gregorian calendar, with the year 0 being 1 BCE.

fn yo(&self, year: i32, ordinal: u32) -> Date<Self>

Makes a new Date from year, day of year (DOY or “ordinal”) and the current time zone. This assumes the proleptic Gregorian calendar, with the year 0 being 1 BCE.

fn yo_opt(&self, year: i32, ordinal: u32) -> LocalResult<Date<Self>>

Makes a new Date from year, day of year (DOY or “ordinal”) and the current time zone. This assumes the proleptic Gregorian calendar, with the year 0 being 1 BCE.

fn isoywd(&self, year: i32, week: u32, weekday: Weekday) -> Date<Self>

Makes a new Date from ISO week date (year and week number), day of the week (DOW) and the current time zone. This assumes the proleptic Gregorian calendar, with the year 0 being 1 BCE. The resulting Date may have a different year from the input year.

fn isoywd_opt(
    &self,
    year: i32,
    week: u32,
    weekday: Weekday
) -> LocalResult<Date<Self>>

Makes a new Date from ISO week date (year and week number), day of the week (DOW) and the current time zone. This assumes the proleptic Gregorian calendar, with the year 0 being 1 BCE. The resulting Date may have a different year from the input year.

fn timestamp(&self, secs: i64, nsecs: u32) -> DateTime<Self>

Makes a new DateTime from the number of non-leap seconds since January 1, 1970 0:00:00 UTC (aka “UNIX timestamp”) and the number of nanoseconds since the last whole non-leap second.

fn timestamp_opt(&self, secs: i64, nsecs: u32) -> LocalResult<DateTime<Self>>

Makes a new DateTime from the number of non-leap seconds since January 1, 1970 0:00:00 UTC (aka “UNIX timestamp”) and the number of nanoseconds since the last whole non-leap second.

fn timestamp_millis(&self, millis: i64) -> DateTime<Self>

Makes a new DateTime from the number of non-leap milliseconds since January 1, 1970 0:00:00 UTC (aka “UNIX timestamp”).

fn timestamp_millis_opt(&self, millis: i64) -> LocalResult<DateTime<Self>>

Makes a new DateTime from the number of non-leap milliseconds since January 1, 1970 0:00:00 UTC (aka “UNIX timestamp”).

fn timestamp_nanos(&self, nanos: i64) -> DateTime<Self>

Makes a new DateTime from the number of non-leap nanoseconds since January 1, 1970 0:00:00 UTC (aka “UNIX timestamp”).

fn datetime_from_str(&self, s: &str, fmt: &str) -> ParseResult<DateTime<Self>>

Parses a string with the specified format string and returns a DateTime with the current offset. See the format::strftime module on the supported escape sequences.

fn from_local_date(&self, local: &NaiveDate) -> LocalResult<Date<Self>>

Converts the local NaiveDate to the timezone-aware Date if possible.

fn from_local_datetime(
    &self,
    local: &NaiveDateTime
) -> LocalResult<DateTime<Self>>

Converts the local NaiveDateTime to the timezone-aware DateTime if possible.

fn from_utc_date(&self, utc: &NaiveDate) -> Date<Self>

Converts the UTC NaiveDate to the local time. The UTC is continuous and thus this cannot fail (but can give the duplicate local time).

fn from_utc_datetime(&self, utc: &NaiveDateTime) -> DateTime<Self>

Converts the UTC NaiveDateTime to the local time. The UTC is continuous and thus this cannot fail (but can give the duplicate local time).